Skip to Content
Bed Redefiners
Starting A Warm Engine
1
Stop Switch
Step 1.
Stop Switch Move stop switch (A) away from the STOP position.
2
Purge Bulb
Step 2.
Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional four or five times.
3
Recoil Starter
Step 3.
Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grip throttle handle and throttle trigger lockout with left hand. Rapidly pull recoil starter handle/rope (D) until engine fires.
Note: If engine does not start after two or three pulls, use Cold Start Procedure.