Bed Redefiners

1. Always grip throttle handle with right hand, and support handle with left hand

1. Before using Redefiner, check the area and remove objects that could be thrown.

1. Carefully plan your direction of travel. Walk outside of bed. Be aware of curbs or other obstacles.

1. Work with body turned toward engine as shown. Travel in
   direction of arrow, pulling rather than pushing unit. Carefully watch bed edge and direction of travel. Do NOT walk backwards.

1. When starting to work, run the engine at full throttle, and lower the blade gently into the ground. Travel around perimeter of bed, allowing the Redefiner to improve bed's edge.

1. Do not force the blade. Move only as quickly as conditions
   will allow. If performance suffers or engine RPM drops, reduce walking speed or decrease blade depth and allow engine RPM to return to normal before continuing.

Note: Blade height may need to be adjusted due to differences in height between the bed and the top of the grass.

1. Loosen adjustment knob (A) and adjust the blade’s depth of cut. Tighten adjustment knob (A) when desired blade height is achieved.

1. If shield clogs with mud or debris, do not hit unit against
   hard surfaces to clean, or damage to unit may occur. Stop engine and unclog shield with a suitable tool.