Skip to Content
Bed Redefiners
Blade Installation
1
Remove bed redifining blade
Step 1.
Remove bed redefining blade as shown in Blade Replacement section. Discard used split pin.
2
Do not remove inner blade
Step 1.
Do not remove inner blade adapter (A) or locking tool (B).
3
Install center blade
Step 3.
Install and center edger blade (C) on inner adapter.
4
Install outer adapter
Step 4.
Install outer adapter (D) and nut (E).
5
Tighten nut
Step 5.
Tighten nut (E) firmly, counterclockwise.
6
Remove locking tool
Step 6.
Remove locking tool (B).
7
Install new split pin
Step 7.
Install new split pin (F) to secure nut (E).