Skip to Content
Augers & Engine Drills
Starting Warm Engine
1
Stop Switch
Step 1.
Move stop switch button (B) forward away from the “STOP”
position.
2
Purge Bulb
Step 2.
Pump purge bulb (E) until fuel is visible in the “Clear” fuel
return line.
3
Decompression
Step 3.
Press decompression button (D) once.
4
Recoil Starter
Step 4.
Lay the unit on a flat, clear area, and pull the recoil starter handle (A) until the engine fires.
Note: If engine does not start after 5 pulls, use Cold Start Procedure.