Augers & Engine Drills

• This model is equipped with reverse rotation
mechanism.
• When drilling, set shift lever down to clockwise
(CW) rotation position.
• If bit is locked due to deep penetration during
drilling operation, set shift lever up to
counterclockwise (CCW) rotation position and
operate reversed for easy pulling-out.
• When changing direction of drill rotation,
operate as follows:

• Return engine to idle.

• Engine shift lever to CW or CCW position
  with a slight acceleration of the throttle
  trigger.
  To properly lock the gears in the gear case.

• Do not operate shift lever forcibly when
  changing rotation direction.