Skip to Content
Trimmers & Brushcutters
Starting Warm Engine
The attachment should not move at idle, otherwise serious personal injury may result.
If attachment moves, readjust carburetor according to
Carburetor Adjustment instructions in this manual or see your ECHO Dealer
1
Move stop switch button (A) forward away from the STOP position.
2
Pump purge bulb (B) until fuel is visible in the “Clear” fuel return line.
3
Note: Lightly place knee on drive shaft to stabilize unit during starting. Do not apply excessive downward force or damage to unit can occur.
4
Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grip throttle handle and throttle trigger lockout with left hand. Rapidly pull recoil starter handle/rope (C) until engine fires.
5