Skip to Content
Trimmers & Brushcutters
Starting Warm Engine
1
Stop Switch
Step 1.
Stop Switch Move stop switch (A) away from the STOP position.
2
Purge Bulb
Step 2.
Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional four or five times.
3
Recoil Starter
Step 3.
Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grasp throttle handle with left hand and fully depress throttle trigger to wide open position. Gently pull recoil starter handle/rope (D) until engine fires or 2 to 3 engine engagements.
Note: If engine does not start after 5 pulls, use Cold Start Procedure.