Specification | Value |
---|---|
Length (without cutter head) | 1,783 mm (70.2 in.) |
Width | 687 mm (27 in.) |
Height | 497 mm (19.6 in.) |
Weight - Dry (without cutter head) | 5.2 kg (11.5 lb.) |
Specification | Value |
---|---|
Type | Air-cooled, two-stroke, single-cylinder gasoline engine |
Bore | 32.2 mm (1.27 in.) |
Stroke | 26.0 mm (1.02 in.) |
Displacement | 21.2 cc (1.29 in³) |
Specification | Value |
---|---|
Exhaust | Spark arrester muffler or spark arrester muffler with catalyst |
Specification | Value |
---|---|
Carburetor | Diaphragm with purge pump |
Ignition System | Flywheel magneto, capacitor discharge ignition type |
Spark Plug | NGK BPM8Y (BPMR8Y in Canada) - Gap 0.65 mm (0.026 in.) |
Fuel Type | Mixed (gasoline and two-stroke oil) |
Gasoline/Oil Ratio | 50:1 |
Gasoline | Use 89 octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol, or 15% MTBE. Do not use alternative fuels such as E20 or E85. |
Oil | ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345-FD, two-stroke, air-cooled engine oil. |
Fuel Tank Capacity | 0.38 L (12.8 US fl. oz.) |
Specification | Value |
---|---|
Starter System | Automatic rewind starter |
Clutch | Centrifugal type |
Specification | Value |
---|---|
Vibration Isolated System | Rubber cushion on engine mount |
Operating Rod | 25.0 mm (1.0 in.) diameter aluminum tube |
Drive Shaft | 6.0 mm (0.24 in.) flexible shaft |
Gear Case Ratio | 1.62:1 |
Rotating Direction | Counterclockwise (viewed from top) |
Specification | Value |
---|---|
Type | Speed Feed® 400 LH Nylon line head, line capacity 6.0 m (20 ft.) |
Specification | Value |
---|---|
Handle | U-handle |
Specification | Value |
---|---|
Idle Speed | 3,000 RPM |
Clutch Engagement Speed | 4,300 RPM |
Wide Open Throttle Speed | 10,000 RPM |