Nylon Line Replacement | Trimmers & Brushcutters

Skip to Content

Trimmers & BrushcuttersNylon Line Replacement

Nylon Line Replacement

Wear gloves or personal injury may result.

Cut-off knife is sharp.
Gear case and surrounding area may be hot.

1

Cut one piece of line to recommended length.

2.0 mm (0.080 in.) diameter 6 m (20 ft.).
2.4 mm (0.095 in.) diameter 6 m (20 ft.).

2

Align arrows on top of knob with openings in eyelets.

3

Insert one end of trimmer line into an eyelet, and push line equal distance through trimmer head.

4

Hold trimmer head while turning knob clockwise to wind line onto spool until about 13 cm (5 in.) of each line remains exposed.

5

Trimmer head is now fully loaded and ready for operation.

6

When the wear indicators located at the bottom of the Speed-Feed® head are worn smooth, or if holes appear, replacement of the cover or the entire Speed-Feed® head required.

Need more help?

Ask a different questionTrimmers & Brushcutters

Select a different product