Skip to Content
Trimmers & Brushcutters
Nylon Line Replacement
Wear gloves or personal injury may result.
Cut-off knife is sharp.
Gear case and surrounding area may be hot.
1
Remove spool by turning knob clockwise, “right”, and separating parts.
2
Thread a 6 m (20 feet) length of 2.4 mm (0.095 in) or 2.7 mm (0.105 in) ECHO line through hole in spool so that ends are the same length.
3
Wind both ends of line tightly and evenly clockwise (see arrows on spool), and wind from side to side without twisting the lines.
4