Skip to Content
Pro Attachment Series™
Specifications
PAS-225 Value Pack Specifications
Physical Dimensions
| Specification | Value |
|---|---|
| Length | 1793 mm (70.6 in.) |
| Width | 251 mm (9.88 in.) |
| Height | 328 mm (12.9 in.) |
| Weight (dry) | 5.75 kg (12.68 lb.) |
Engine
| Specification | Value |
|---|---|
| Type | Air-cooled, two-stroke, single-cylinder gasoline engine |
| Bore | 32.2 mm (1.27 in.) |
| Stroke | 26.0 mm (1.02 in.) |
| Displacement | 21.2 cc (1.29 cu. in.) |
Exhaust & Ignition
| Specification | Value |
|---|---|
| Exhaust | Spark arrester muffler or spark arrester muffler with catalyst |
| Carburetor | Diaphragm with purge pump |
| Ignition System | Flywheel magneto, capacitor discharge ignition type |
| Spark Plug | NGK BPM-8Y (Gap 0.65 mm (0.026 in.)) |
Fuel & Lubrication
| Specification | Value |
|---|---|
| Fuel | Mixed (Gasoline and Two-stroke Oil) |
| Fuel/Oil Ratio | 50:1 (Power Blend X™ ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345-FD, two-stroke, air-cooled engine oil.) |
| Gasoline | Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol, or 15% MTBE. Do not use alternative fuels such as E-20 or E-85. |
| Oil | Power Blend X™ Premium Universal 2-Stroke Oil |
| Fuel Tank Capacity | 0.44 L (14.9 US fl. oz.) |
Starter & Clutch System
| Specification | Value |
|---|---|
| Starter System | J30 Automatic Rewind Starter |
| Clutch | Centrifugal Type |
Shaft & Transmission
| Specification | Value |
|---|---|
| Drive Shaft (upper & lower) | 6.35 mm (1/4 in.) flexible shaft |
| Rotating Direction | Counterclockwise; viewed from top |
Handle & Accessories
| Specification | Value |
|---|---|
| Trimmer Attachment | Speed Feed® 400 LH Nylon line head, Line capacity 6.0 m (20 ft.) |
| Handle | Front - Loop, Rear Handle (w/rubber) |
| Shoulder Harness | Optional |
Edger Attachment
| Specification | Value |
|---|---|
| Shaft Length | 845 mm (33.25 in.) |
| Attachment Width | 165.1 mm (6.5 in.) |
| Attachment Height | 552.45 mm (21.75 in.) |
| Attachment Weight | 2.54 kg (5.6 lb.) |
| Drive Shaft Type | 6.35 mm (1/4 in.) Flex Shaft |
| Rotation Direction | Clockwise; viewed from right side |
| Blade Length | 203 mm (8 in.) |
| Gear Case Ratio | 2.07 : 1 Reduction |
| Blade Type | Serrated, Anti-clog |
Performance
| Specification | Value |
|---|---|
| Idle Speed | 2,750 RPM |
| Clutch Engagement Speed | 3,800 RPM |
| Wide Open Throttle Speed (W.O.T.) | 8,150 RPM (w/ Nylon Line Head), 10,500 RPM (w/ Edger Attachment) |