Skip to Content
Pro Attachment Series™
Specifications
PAS-2620 Specifications
Physical Dimensions
| Specification | Value |
|---|---|
| Length | 1035 mm (40.7 in.) |
| Width | 273 mm (10.7 in.) |
| Height | 258 mm (10.2 in.) |
| Weight (dry) | 4.5 kg (9.9 lb.) |
Engine
| Specification | Value |
|---|---|
| Type | Air-cooled, two-stroke, single-cylinder gasoline engine |
| Bore | 34.0 mm (1.34 in.) |
| Stroke | 28.0 mm (1.1 in.) |
| Displacement | 25.4 cc (1.55 cu. in.) |
Exhaust & Ignition
| Specification | Value |
|---|---|
| Exhaust | Spark arrester muffler or spark arrester muffler with catalyst |
| Carburetor | Diaphragm with purge pump |
| Ignition System | Flywheel magneto, capacitor discharge ignition type |
| Spark Plug | NGK CMR7H - Gap 0.65 mm (0.026 in.) |
Fuel & Lubrication
| Specification | Value |
|---|---|
| Fuel | Mixed (Gasoline and Two-stroke Oil) |
| Fuel/Oil Ratio | 50:1 |
| Gasoline | Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol, or 15% MTBE. Do not use alternative fuels such as E-20 or E-85. |
| Oil | ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345-FD, two-stroke, air-cooled engine oil. |
| Fuel Tank Capacity | 0.611 L (20.6 US fl. oz.) |
Starter & Clutch System
| Specification | Value |
|---|---|
| Starter System | Automatic Rewind Starter |
| Clutch | Centrifugal Type |
Shaft & Transmission
| Specification | Value |
|---|---|
| Drive Shaft | 6.35 mm (0.25 in.) flexible shaft |
| Rotating Direction | Counterclockwise; viewed from top |
Handle & Accessories
| Specification | Value |
|---|---|
| Front Handle | D-loop type with rubber anti-vibration grip |
| Rear Handle | Plastic molded with rubber over-mold |
| Shoulder Harness | Optional |
Performance
| Specification | Value |
|---|---|
| Idle Speed | 3000 RPM |
| Clutch Engagement Speed | 4100 RPM |
| Wide Open Throttle Speed (W.O.T.) | 11,200 RPM |