WARNING

Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing, and loose objects away from all openings.

• Always stop the engine, disconnect spark plug, and make sure all moving parts have completely stopped before:

  • Removing obstructions

  • Clearing debris

  • Servicing the unit

• Allow unit to cool before service.

• Wear gloves to protect from sharp edges and hot surfaces.

WARNING

Operating a poorly maintained unit can result in serious injuries to the operator or bystanders.
Always follow all maintenance instructions as written to prevent serious personal injury.

Your unit is designed to provide many hours of trouble-free service.

• Perform regular maintenance as scheduled.

• If unsure or unequipped, take it to a Servicing Dealer.

• You may choose to DO-IT-YOURSELF or let the Dealer handle it.

• If a task is not listed, consult your Dealer for repairs.

NOTICE

The use of emission control components other than those specifically designed for this unit is a violation of federal law.

Maintenance Intervals

| Every Refuel | | |
| Fuel System | Inspect³ | 1 |

| 3 Months | | |
| Air Filter | Replace * | 1 |
| Fuel Filter | Inspect * | 1 |
| Fuel Cap Gasket | Inspect * | 1 |
| Spark Plug | Inspect / Clean / Replace * | 1 |
| Muffler Spark Arrestor | Inspect / Clean / Replace * | 2 |
| Cylinder Exhaust Port | Inspect / Clean / De-carbon | 2 |
| Drive Shaft (Flex Cable Models)| Grease¹ | 2 |
| Gear Housing | Grease² | 2 |

| Yearly | | |
| Fuel Filter | Inspect / Replace * | 1 |
| Fuel Cap Gasket | Replace * | 1 |

MAINTENANCE PROCEDURE NOTES:

1. Apply lithium-based grease every 25 hours of use.

2. Apply lithium-based grease every 50 hours of use.

3. Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity.
   * Replacement recommended based on findings during inspection (damage or wear).

IMPORTANT NOTE:

Time intervals shown are maximum.
Your actual use and experience will determine the frequency of required maintenance.