Skip to Content
Pressure WashersI can’t remove the lance from the spray gun
Pressure Washers

Pressure Washers

I can’t remove the lance from the spray gun

Try this solution

Follow the steps below

All lances and the detergent tank are attached and removed from the spray gun in the same manner.

  1. Insert the quick-release end of the lance/detergent tank into the spray gun. Press the spray gun and lance together (about a 1/8”) and turn clockwise. The lance will lock in place.

  2. Remove the lance by reversing this procedure. Press the spray gun and lance together and turn counter clockwise.

  3. The lance will slide out. Or, hold the spray gun and lance in an upright position with the nozzle end on the floor.

  4. Push the whole assembly straight down to loosen the connection, and then follow the removal process again. You may also spray soapy water or a lubricant in the area where the lance connects to the spray gun.

Need more help?

Ask a different questionPressure Washers
Select a different product
On this page
©2025 ECHO INCORPORATED, ALL RIGHTS RESERVEDSitemap
SHOPStore LocatorApparelParts CatalogBuy Service Parts
CORPORATE INFORMATIONYamabiko CorporationECHO WorldwideCareer OpportunitiesProduct Recall
DISTRIBUTION NETWORKNorth America Distributor PartnersLocal DealersLatin America Distributor PartnersHome DepotDealer Business Portal
BRANDSECHO CanadaShindaiwa Kwiet PowerShindaiwa USAECHO Latin AmericaShindaiwa Latin America
Sitemap