Skip to Content
Hedge Trimmers
Starting Warm Engine
1
Stop Switch
Step 1.
Move stop switch (A) away from the STOP position.
2
Purge bulb
Step 2.
Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.
3
Recoil Starter
Step 3.
Place the unit on a flat, clear area. Grip the support handle securely with one hand, and pull the recoil starter handle (D) until engine starts.
Note: If engine does not start after 2-3 pulls, use Cold Start Procedure.