Skip to Content
Hedge Trimmers
Starting Warm Engine
1
Stop Switch
Step 1.
Stop Switch Move stop switch (A) away from the STOP position.
2
Purge Bulb
Step 2.
Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional four or five times.
3
Recoil Starter
Step 3.
Place the unit on a flat, clear area. Grip the support handle securely with one hand, and pull the recoil starter handle (D) until engine starts.
Note: If engine does not start after five pulls, use Cold Start Procedure.