Skip to Content
Edgers
Specifications
MODEL: PE-2620 / PE-2620S
| Specification | PE-2620 | PE-2620S |
|---|---|---|
| Length (without cutter head) | 1,740 mm (69.0 in.) | 1,775 mm (69.9 in.) |
| Width | 352 mm (13.8 in.) | 273 mm (10.7 in.) |
| Height | 335 mm (13.1 in.) | 344 mm (13.5 in.) |
| Weight - dry (without cutter head) | 5.4 kg (11.9 lb.) | - |
| Type of Engine | Air-cooled, two-stroke, single cylinder gasoline engine | Same as PE-2620 |
| Displacement | 25.4 cc (1.55 in³) | Same as PE-2620 |
| Bore | 34 mm (1.34 in.) | Same as PE-2620 |
| Stroke | 28 mm (1.10 in.) | Same as PE-2620 |
| Carburetor | Diaphragm with purge pump | Same as PE-2620 |
| Air Filter System | Primary – Non-woven fabric, Secondary (pre-filter) – Polyurethane foam | Same as PE-2620 |
| Ignition System | Flywheel magneto, capacitor discharge ignition type | Same as PE-2620 |
| Spark Plug | NGK CMR7H, Gap 0.6 mm (0.026 in.) | Same as PE-2620 |
| Exhaust System | Spark arrester muffler or spark arrester muffler with catalyst | Same as PE-2620 |
| Starter System | Automatic rewind starter | Same as PE-2620 |
| Clutch | Centrifugal type | Same as PE-2620 |
| Fuel | Mixed (gasoline and two-stroke oil) | Same as PE-2620 |
| Fuel/Oil Ratio | 50:1 | Same as PE-2620 |
| Gasoline | Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use alternative fuels such as E15 or E85. | Same as PE-2620 |
| Oil | ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345-FD, two-stroke, air-cooled engine oil. | Same as PE-2620 |
| Fuel Tank Capacity | 0.56 L (18.9 US fl. oz.) | Same as PE-2620 |
| Operation Rod | 25.0 mm (1.0 in.) diameter aluminum tube | Same as PE-2620 |
| Drive Shaft | 6.35 mm (0.25 in.) flexible shaft | Same as PE-2620 |
| Gear Reduction Ratio | 2.07:1 | Same as PE-2620 |
| Rotating Direction | Counterclockwise; viewed from left side | Same as PE-2620 |
| Cutter Head | 203 mm (8.0 in.) blade | Same as PE-2620 |
| Vibration Reduction System | Rubber cushion on engine mount. Rubber anti-vibration grip on rear handle | Rear – Throttle handle with rubber anti-vibration grip |
| Handle | Front – D-loop type | Same as PE-2620 |
| Idle Speed | 3,000 RPM | Same as PE-2620 |
| Clutch Engagement Speed | 4,100 RPM | Same as PE-2620 |
| Wide Open Throttle Speed | 11,500 RPM | Same as PE-2620 |