Skip to Content
Edgers
Specifications
MODEL DPE-2100
| Specification | DPE-2100 |
|---|---|
| Length | 1,751 mm (69 in.) |
| Width | 302 mm (12 in.) |
| Height | 345 mm (13 in.) |
| Weight (without cutter and battery) | 4.2 kg (9 lbs.) |
Battery
| Specification | Details |
|---|---|
| Battery | ECHO eFORCE® 56V series batteries |
| Type | Li-Ion |
| Battery Voltage | 56V (rated 50.4) |
| Capacity | See Battery Manual |
| Charger Type | ECHO eFORCE® 56V series charger |
| Charger Input Voltage | 120V AC 60Hz |
| Charging Time | See Battery Manual |
Operating System
| Specification | Details |
|---|---|
| Operating Rod | 25.0 mm (0.98 in.) aluminum tube |
| Drive Shaft | 6.35 mm (0.25 in.) flexible shaft |
| Cutting Attachment | 8" Blade |
Engine & Performance
| Specification | Details |
|---|---|
| Rotating Direction | Counterclockwise, viewed from left |
| Motor Type | DC / Brushless |
| Speed | 9,400 - 9,800 RPM |
| Gear Case Ratio | 1.62 |
| Lubrication | Lithium-based grease |
Charger Lights
| Light Indicator | Meaning |
|---|---|
| Green Blinking | Battery is charging |
| Green (Solid) | Battery is fully charged |
| Red (Solid) | Battery is too warm. Remove for approximately 30 minutes to cool down |
| Red Blinking | Defective battery. Remove and replace with new battery |