Skip to Content
Edgers
Specifications
MODEL PE-225
| Specification | PE-225 |
|---|---|
| Length (without cutter head) | 1,724 mm (67.9 in.) |
| Width | 304 mm (12.0 in.) |
| Height | 335 mm (13.2 in.) |
| Weight (dry) (without cutter head) | 5.7 kg (12.5 lb.) |
| Engine Type | Air cooled, two-stroke, single cylinder gasoline engine |
| Bore | 32.2 mm (1.27 in.) |
| Stroke | 26.0 mm (1.02 in.) |
| Displacement | 21.2 cc (1.29 in.³) |
| Exhaust | Spark arrester muffler or spark arrester muffler with catalyst |
| Carburetor | Diaphragm with purge pump |
| Ignition System | Flywheel magneto, capacitor discharge ignition type |
| Spark Plug | NGK BPM8Y (BPMR8Y in Canada), Gap 0.65 mm (0.026 in.) |
| Fuel | Mixed (gasoline and two-stroke oil) |
| Gasoline/Oil Ratio | 50:1 |
| Gasoline | Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use alternative fuels such as E-15 or E-85. |
| Oil | ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345-FD, two-stroke, air-cooled engine oil. |
| Fuel Tank Capacity | 0.38 L (12.8 US fl. oz.) |
| Starter System | Automatic rewind starter |
| Clutch | Centrifugal type |
| Vibration Reduction Systems | Rubber cushion on engine mount |
| Operation Rod | 25 mm (1.0 in.) diameter aluminum tube |
| Drive Shaft | 6.0 mm (0.25 in.) flexible shaft |
| Gear Case Ratio | 1.62:1 |
| Rotating Direction | Counterclockwise (viewed from left side) |
| Cutter Head | Edger blade |
| Blade Length | 197 mm (7.75 in.) |
| Blade Width | 50.8 mm (2 in.) |
| Blade Thickness | Standard 2.3 mm (0.090 in.), Premium 4.6 mm (0.181 in.) |
| Handle | Front - D-loop type with plastic grip, Rear - Plastic grip with throttle trigger and switch |
| Idle Speed | 3,000 RPM |
| Clutch Engagement Speed | 4,200 RPM |
| Wide Open Throttle Speed | 10,900 RPM |