Cut-off Saws & Concrete Saws

Fill the fuel tank with fuel mixture. It is not permitted to fill fuel above the
shoulder level of fuel tank.

Press the decompression device.

Push primer pump until fuel is visible in primer pump.

Pull out choke all the way (engages the fast idle throttle latch setting).

Securely hold the engine cut-off saw. Pull starter grip briskly, but only 1/2
to 2/3 its full length. Pulling rope to the end may damage the starter.

Push in the choke the first time engine fires, and crank until engine starts
and runs. In cold weather you should keep the choke out just a little until
the engine gets very warm. But, do not operate with the choke out.

Squeeze and release trigger when engine runs to release the fast idle
throttle latch setting. You now have trigger control of the throttle speed.