Skip to Content
Cut-off Saws & Concrete Saws
Specifications
| MODEL | CSG-7410 |
|---|---|
| External Dimensions | Without cutting wheel |
| Length × Width × Height | 620 × 240 × 418 mm (24.4 × 9.4 × 16.5 in.) |
| Mass (without cutting wheel and empty tank) | 10.3 kg (22.7 lb.) |
Volume:
| Fuel Tank Capacity | 700 mL (23.67 US fl. oz.) |
|---|---|
| Fuel (Mixture Ratio) | 50:1 ratio with ECHO brand oil, ISO-L-EGD (ISO/CD 13738), JASO M345-FC/FD two-stroke, air-cooled engine oil. |
| Gasoline | Use 89 octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol, or 15% MTBE. |
Engine:
| Type | Air-cooled, two-stroke, single-cylinder gasoline engine |
|---|---|
| Engine Displacement | 73.5 cc (4.49 cu. in.) |
| Carburetor | Diaphragm type, Inner vent type |
| Magneto | Flywheel magneto, CDI type |
| Spark Plug | NGK BPMR7A |
| Starter | Recoil starter |
| Clutch | Centrifugal type |
| Maximum Shaft Brake Power | 3.2 kW |
| Wide Open Throttle Speed | 9650 RPM (9350-9750 RPM) |
| Idle Speed | 2800 RPM (2600-3000 RPM) |
| Throttle Control | Throttle trigger with throttle lockout |
Cutting Device:
| Belt | 6PJ-808 |
|---|---|
| Pulley Ratio | 2.57:1 |
| Belt Tensioner | Coil Spring System |
| Wheel Dimensions | 350 × 4.7 × 20 mm (14 × 6/32 × 25/32 in.) |
| Maximum Cut-off Wheel Speed | 3820 RPM |
| Flange Outside Diameter | 100 mm |
| Wheel Fastener Tightening Torque | 25 - 30 N·m |
| Maximum Spindle Speed Rating | 3820 RPM |
Sound Pressure Level:
| Measured at 15 m (50 ft) | 78.2 dB(A) |
|---|
Other Device:
| Vibration Reduction System | Rubber mounted between the engine and the handles |
|---|