Belt Change and Adjustment | Cut-off Saws & Concrete Saws

Skip to Content

Cut-off Saws & Concrete SawsBelt Change and Adjustment

Belt Change and Adjustment

Adjust the belt if it becomes loose.

Loosen the 2 pulley cover bolts about 1 turn.
Turn the tension screw so the washer lines up
with the mark on the clutch cover.
Tighten the 2 pulley cover bolts. Note: Tighten to
a torque of 23 to 27N･m (230 to 270 kgf･cm).

Need more help?

Ask a different questionCut-off Saws & Concrete Saws

Select a different product