Starting Warm Engine | Chainsaws

Skip to Content

ChainsawsStarting Warm Engine

Starting Warm Engine

Make sure the bar and chain are free from any obstruction when starting the chainsaw.

1

Move chain brake lever fully FORWARD to LOCK chain brake before starting.

2

Confirm there is fuel and chain oil in the tanks.

3

Move stop switch (A) UP to “RUN” position.

4

Press the decompression device (B).

5

Securely hold the chainsaw as shown and pull starter handle.

6

Choke may be used if necessary, but after first starting sound, squeeze throttle trigger to release choke and return engine to idle.

7

Note: If engine does not start after 5 pulls, use cold start procedure.

Need more help?

Ask a different questionChainsaws

Select a different product