Skip to Content
Chainsaws
Starting Warm Engine
Make sure the bar and chain are free from any obstruction when starting the chainsaw.
1
Move chain brake lever fully FORWARD to LOCK chain brake before starting.
2
Confirm there is fuel and chain oil in the tanks.
3
Move ignition switch (A) to “RUN” position.
4
Securely hold the chainsaw as shown and pull starter handle.
5
Choke may be used if necessary, but after first starting sound, squeeze throttle trigger to release choke and return engine to idle.
6
Note: If engine does not start after five pulls, use cold start procedure.
7