Skip to Content
ChainsawsStarting Warm Engine
Chainsaws

Chainsaws

Starting Warm Engine

Make sure the bar and chain are free from any obstruction when starting the chainsaw.

1

Move chain brake lever (A) fully FORWARD to LOCK chain brake before starting.

2

Confirm there is fuel and chain oil in the tanks.

3

Move ignition switch (B) to UP position.

4

Securely hold the chainsaw as shown and pull starter handle (D).

5

Choke (C) may be used if necessary, but after first starting sound, squeeze throttle trigger lock and throttle trigger to release choke (C) and return engine to idle.

6

Note: If engine does not start after 5 pulls, use cold start procedure.

7

Note: Do not increase engine speed while chain brake (A) is locked. Severe brake damage will result.

Need more help?

Ask a different questionChainsaws
Select a different product
©2025 ECHO INCORPORATED, ALL RIGHTS RESERVEDSitemap
SHOPStore LocatorApparelParts CatalogBuy Service Parts
CORPORATE INFORMATIONYamabiko CorporationECHO WorldwideCareer OpportunitiesProduct Recall
DISTRIBUTION NETWORKNorth America Distributor PartnersLocal DealersLatin America Distributor PartnersHome DepotDealer Business Portal
BRANDSECHO CanadaShindaiwa Kwiet PowerShindaiwa USAECHO Latin AmericaShindaiwa Latin America
Sitemap