Starting Warm Engine | Chainsaws

Skip to Content

Starting Warm Engine

Make sure the bar and chain are free from any obstruction when starting the chainsaw.

1

Move chain brake lever (A) fully forward to lock chain brake before starting.

2

Confirm there is fuel and chain oil in the tanks

3

Move stop switch (B) to UP position.

4

Press the decompression device.

5

Securely hold the chain saw as shown and pull starter handle (D).

6

After starting the engine, pull front hand guard towards the operator immediately (chain brake unlocked position).

7

Note: If engine does not start after 5 pulls, use cold start procedure.

8

Note: Do not increase engine speed while chain brake (A) is locked. Severe brake damage will result.

Need more help?

Ask a different question

Select a different product