Starting Warm Engine | Chainsaws

Skip to Content

Starting Warm Engine

Make sure the bar and chain are free from any obstruction when starting the chainsaw.

1

Move chain brake lever (A) fully forward to the lock position.

2

Confirm there is fuel and chain oil in the tanks.

3

Securely hold the chainsaw as shown and pull starter handle.

4

Choke (A) may be used if necessary. When the engine starts, squeeze throttle trigger (B) to release choke to open position and return engine to idle.

5

Note: If engine does not start after five pulls, use the cold start procedure.

Need more help?

Ask a different question

Select a different product