Skip to Content
Chainsaws
Starting Warm Engine
Make sure the bar and chain are free from any obstruction when starting the chainsaw.
1
Move chain brake lever (A) fully forward to lock chain brake before starting.
2
Confirm there is fuel and chain oil in the tanks
3
Move stop switch (B) to UP position.
4
Press the decompression device.
5
Securely hold the chain saw as shown and pull starter handle (D).
6
After starting the engine, pull front hand guard towards the operator immediately (chain brake unlocked position).
7
Note: If engine does not start after 5 pulls, use cold start procedure.
8