Starting Warm Engine | Blowers

Skip to Content

Starting Warm Engine

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the choke.

1

Move stop switch (A) away from the STOP position.

2

Move throttle position lever (B) midway between idle and full throttle positions.

3

Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line.

4

Place the unit on a flat, clear area. Firmly grasp throttle handle (D) with left hand and rapidly pull recoil starter handle/ rope (E) until engine fires.

Need more help?

Ask a different question

Select a different product