Skip to Content
Blowers
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the choke.
1
PB-770 H Move throttle position lever (A) to IDLE DETENT positions.
2
PB-770 T Slide Throttle Position / Stop Switch Button (A) back to idle position.
3
PB-770 H and T Pump purge bulb (D) until fuel is visible. Pump bulb an additional 4 or 5 times.
4
Pull recoil starter handle (E) and engine should start. Do not use choke (C)
5