Skip to Content
Blowers
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the choke.
1
PB-760 LN H Move throttle position lever (A) to IDLE DETENT position.
2
PB-760 LN T Slide Throttle Position / Stop Switch Button (A) back to IDLE position.
3
PB-760 LN H and T Pump purge bulb (D) until fuel is visible. Pump bulb an additional 4 or 5 times.
4
Pull recoil starter handle (E) and engine should start. Do not use choke (C).
5