Starting Warm Engine | Blowers

Skip to Content

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the choke.

1

PB-755S H Move throttle position lever (A) to IDLE DETENT position.

2

PB-755S T Move throttle position lever (A) forward to IDLE position. Slide stop switch (B) forward to RUN position.

3

PB-755S H and T Pull recoil starter handle (E) and engine should start. Do not use choke (C).

4

Note: If engine does not start after 5 pulls, use cold start procedures.

Need more help?

Ask a different question

Select a different product