Skip to Content
Blowers
Starting Cold Engine
1
Recoil starter: Use short pulls - only 1/2-2/3 of rope length for starting. Do not allow the rope to snap back in. Always hold the unit firmly.
Rotate throttle handle downward to a comfortable operating position.
2
Move throttle position lever (A) to START/IDLE DETENT position ( ).
3
Move choke (B) to "Cold Start" ( ) position
4
Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line.
5
Pull recoil starter handle (D) until engine fires, or maximum 5 pulls.
6
Move choke lever (B) to Run ( ) position, and if necessary, restart engine.
7
Note: If engine does not start with choke in “Run” position after 5 pulls, repeat instructions 2 - 5.
Allow engine to warm up before use