Starting Cold Engine | Blowers

Skip to Content

Starting Cold Engine

Starting Cold Engine

1

Move throttle position lever (A) to IDLE DETENT positions

2

Slide Throttle Position / Stop Switch Button (A) back to idle position.

3

Move choke (C) up to Cold Start Position ( )

4

Pump purge bulb (D) until fuel is visible. Pump bulb an additional 4 or 5 times

5

Pull recoil starter handle (E) until engine fires, or a maximum of 5 pulls

6

After engine fires (or 5 pulls), move choke lever back to Run ( ) position, then pull starter handle/rope until engine starts and runs. Allow unit to warm up at idle for several minutes.

7

Note: If engine does not start with choke in “Run” position after 5 pulls, move choke to “Cold Start” ( ) position, and repeat steps 4 & 5.

8

Allow engine to warm up for several minutes before use.

9

After engine warm-up, move throttle lever gradually to increase engine RPM to desired operating speed.

Need more help?

Ask a different question

Select a different product