Skip to Content
Chainsaws
Starting Warm Engine
Make sure the bar and chain are free from any obstruction when starting the chainsaw.
1
Move chain brake lever (A) fully forward to lock chain brake before starting.
2
Confirm there is fuel and chain oil in the tanks.
3
Move stop switch (B) to RUN position.
4
Press decompression device (C).
5
Securely hold the chainsaw as shown and pull starter handle (E).
6
Choke may be used if necessary, but after first firing sound, pull throttle trigger to release choke.
7
After starting the engine, pull front hand guard towards the operator immediately (chain brake unlocked position).
8
Note: If engine does not start after five pulls, use cold start procedure.
9